|
Composite Susp. Eccentric Bushing (4)
#332315
Molded composite eccentric suspension pin inserts with 2 different offset positions. Set of 4 insert frames allows pins to have entire range of adjustment (+1.5, +0.5, -0.5, -1.5mm).
|
|
|
Graphite Roll-Center Bridge - V2
#333060
CNC-machined rear roll center bridge made from thick, top-grade graphite. Includes multiple roll center mounting positions.
|
|
|
FRP Shock Tower Rear 3mm - V2
#333080
CNC-machined rear shock tower made from top-grade 3.0mm thick FRP material. Includes multiple shock upper mounting positions.
|
|
|
Hardened Steel Brake Pad - Laser Cut (2)
#334120
High-precision, ultra-efficient steel brake pads for NT1 are laser cut and precision ground on both sides for an ultra-smooth surface finish to guarantee maximum braking efficiency. Set of 2.
|
|
|
Brake Pad Ferodo® (2)
#334130
Ferodo® fiber brake pads for NT1, must be glued onto #334120 steel brake pads. Set of 2.
|
|
|
Lightweight Brake Disk Adapter - Alu 7075 T6
#334141
For serious racers concentrating on weight savings, XRAY's new optional CNC-machined brake disk adapter is CNC-machined from tough 7076 T6 alu, and has been strategically lightened by 30% compared to the standard #334140 adapter. Rotating mass is reduced without sacrificing strength or durability. Includes factory-pressed pins (non-replaceable).
|
|
|
Alu Wheel Hub 12mm (2)
#335250
CNC-machined, premium aircraft aluminum standard offset wheel hubs for XRAY NT1, a direct replacement for composite wheel hubs. These wheel hubs are strategically machined for optimum strength, balance, and lightness, and are marked for easy identification. Secured on drive axle by setscrew. Set of 2 hubs in each package.
|
|
|
CVD Rear Drive Shaft Set - Hudy Spring Steel™ (1)
#335305
This super-efficient and performance-enhancing rear CVD (constant velocity drives) set for the NT1 replaces the standard rear drive shaft and drive axle. Rebuildable with separately-available spare parts. Used for REAR only. Contains parts for ONE complete rear CVD only.
|
|
|
2-Speed Shaft - Lightweight
#335511
For serious racers that are conscious of weight savings, XRAYâ™s new optional lightweight 2-speed layshaft is precision ground, heat-treated and polished for smooth operation, extra strength, and long life, and has been strategically lightened by 50%.
|
|
|
Steel Pivot Ball 8.4mm (2)
#337250
Steel 8.4mm pivot balls hardened and ultra-precisely hand ground for very high durability and long life. Set of 2.
|
|
|
Alu Adjusting Nut M10x1 (4)
#337252
Alu M10 adjusting nut for capturing pivot balls in front steering blocks and rear uprights. Set of 4.
|
|
|
Composite Ball Cup 8.4mm (8)
#337254
Molded composite ball cups for cushioning alu M10 alu adjusting nuts against 8.4mm pivot balls. Set of 8.
|
|
|
Pin 2x8 (10)
#981208
Polished chrome pin. Dia. x length = 2mm x 8mm. Set of 10 pieces.
|
|
|
Pin 2x10 (10)
#981210
Polished chrome pin. Dia. x length = 2mm x 10mm. Set of 10 pieces.
|
|
ID |
Product Name |
Released |
334111 |
|
Nov. 05, 2009 |
335511 |
|
Sep. 25, 2008 |
335305 |
|
Jul. 13, 2007 |
334141 |
|
May 30, 2007 |
335250 |
|
May 30, 2007 |
331100 |
|
Apr. 19, 2007 |
332070 |
|
Apr. 19, 2007 |
332315 |
|
Apr. 19, 2007 |
332630 |
|
Apr. 19, 2007 |
333010 |
|
Apr. 19, 2007 |
333020 |
|
Apr. 19, 2007 |
333050 |
|
Apr. 19, 2007 |
333060 |
|
Apr. 19, 2007 |
333080 |
|
Apr. 19, 2007 |
333110 |
|
Apr. 19, 2007 |
333130 |
|
Apr. 19, 2007 |
333240 |
|
Apr. 19, 2007 |
333310 |
|
Apr. 19, 2007 |
333420 |
|
Apr. 19, 2007 |
333450 |
|
Apr. 19, 2007 |
| |
|
|